Are there any special requirements for the storage of Cold Drawn Round Steel Bar

The storage of Cold Drawn Round Steel Bar has the following special requirements:
Dry environment: It should be stored in a dry and ventilated environment, and the relative humidity should be kept below 60%. Because a humid environment can easily cause rust on the surface of steel, affecting its performance and appearance. If stored in the open air, it needs to be covered with waterproof canvas to prevent rain from directly falling on the steel.
Avoid contact with corrosive substances: Corrosive substances such as acids, alkalis, and salts will corrode Cold Drawn Round Steel Bar, so it should be stored in isolation from these substances. At the same time, it is also necessary to avoid storage near places where chemical gases are emitted, such as chemical plants, electroplating plants and other surrounding areas.
Classified storage: Steel should be classified and stored according to its specifications, models, materials, etc., which is convenient for management and retrieval, and can also prevent confusion of different types of steel. And obvious signs should be set up in the storage area to indicate the relevant information of the steel.
Prevent deformation: When storing, pay attention to prevent the steel from being deformed by heavy pressure or external impact. For longer steel bars, they should be stored in a multi-point support or hanging manner to avoid bending and deformation due to their own weight. In addition, do not stack other heavy objects on the steel bars.
If you want to know if there are any special requirements for the storage of Cold Drawn Round Steel Bar, you can contact Zhongao's professional technicians and we will do our best to help you!